There was a discussion on the EVDL a while back about the 3W LED tail light brightness as compared to the regular tail light. The led bulbs were purchased from Super Bright LEDs. The picture shows three different bulb arrangements each with the brake off then on.
Picture
1 - 3W led tail
2 - 3W led tail, led brake, 3rd
3 - 10W regular tail
4 - 10W regular tail, led brake, 3rd
5 - 5W regular tail
6 - 5W regular tail, 10W brake, 3rd
The pictures were taken with a Canon EOS-20D, EFS 17-85mm lens at the 85mm mark, manual mode with 1/6" at F32, ISO800, white balance on shade. The camera was about 50 feet from the tail light. It is difficult to see the real brightness difference between the lights. In the day light the 5W incandescent is not very noticeable. The 10W is better but the 3W led is very intense and quite noticeable. The leds also clearly come on quicker. The Gizmo has a smart blink unit which blinks the brake lights several times when the brake is applied. The leds are more obvious since they come on and shut off a few ms faster than the other lights. The "3rd" brake light is not what came standard on the Gizmo. The original led 3rd light was almost not noticeable in the day light since it had a narrow beam width and was aimed upward a little. Even when I re-aimed it it was not very noticeable. The current 3rd light is one for a pickup shell top.
If any one has any suggestions on how to take more accurate night pictures of such a small point of light let me know.
Posts
